<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	>

<channel>
	<title>Table Saw Alignment</title>
	<atom:link href="http://tablesawalignment.com/blog/?feed=rss2" rel="self" type="application/rss+xml" />
	<link>http://tablesawalignment.com/blog</link>
	<description>The Ultimate Guide to Table Saw Alignment</description>
	<pubDate>Thu, 29 Oct 2009 01:06:56 +0000</pubDate>
	<generator>http://wordpress.org/?v=2.5.1</generator>
	<language>en</language>
			<item>
		<title>Changing arbor bearings</title>
		<link>http://tablesawalignment.com/blog/?p=26</link>
		<comments>http://tablesawalignment.com/blog/?p=26#comments</comments>
		<pubDate>Wed, 24 Jun 2009 23:15:02 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Changing Arbor Bearings]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=26</guid>
		<description><![CDATA[The bearings on the arbor shouldn&#8217;t spin freely because they are lubricated with grease.  But, if they fail the run-out and play tests, and feel pretty rough when you turn the arbor by hand, then you should probably change them.  It&#8217;s not such a difficult task when you have the right tools.  The key is [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=26</wfw:commentRss>
		</item>
		<item>
		<title>Member table saw rebuild projects</title>
		<link>http://tablesawalignment.com/blog/?p=24</link>
		<comments>http://tablesawalignment.com/blog/?p=24#comments</comments>
		<pubDate>Tue, 16 Sep 2008 21:01:13 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Member rebuild projects]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=24</guid>
		<description><![CDATA[Inspired by the chronicles of my table saw rebuild project, several members have embarked on their own adventure.  This article hosts their efforts.  Please feel free to add comments or questions. 
If you have written up your own rebuild project, please send it to me so that I can include it in this section!  I think [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=24</wfw:commentRss>
		</item>
		<item>
		<title>Table Saw Adjustment: Blade Tilt</title>
		<link>http://tablesawalignment.com/blog/?p=22</link>
		<comments>http://tablesawalignment.com/blog/?p=22#comments</comments>
		<pubDate>Fri, 15 Aug 2008 03:14:53 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Blade Tilt]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=22</guid>
		<description><![CDATA[What
There is a mechanism on most table saws that allows the arbor to be tilted for making angled (bevel) cuts.

As shown here, a crude scale and pointer are usually included to give the user an approximate indication of the blade tilt angle.  You can see the scale is divided into one degree increments from 0° [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=22</wfw:commentRss>
		</item>
		<item>
		<title>Table Saw Rebuild: Disassembly and Inspection</title>
		<link>http://tablesawalignment.com/blog/?p=21</link>
		<comments>http://tablesawalignment.com/blog/?p=21#comments</comments>
		<pubDate>Thu, 07 Aug 2008 20:56:02 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Disassembly and Inspection]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=21</guid>
		<description><![CDATA[Before diving into the project, it&#8217;s good to review a couple of helpful reminders:
It&#8217;s really easy to lose parts

There aren&#8217;t a lot of different parts but keeping them in one place is important. 
I used magnetic parts tray but a jar or small cup will work too. 

It&#8217;s easy to forget how things go together

I reassemble as [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=21</wfw:commentRss>
		</item>
		<item>
		<title>Woodworking related web sites</title>
		<link>http://tablesawalignment.com/blog/?p=20</link>
		<comments>http://tablesawalignment.com/blog/?p=20#comments</comments>
		<pubDate>Tue, 29 Jul 2008 03:54:04 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Interesting Web Sites]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=20</guid>
		<description><![CDATA[These web sites have been of great value to me over the years.  I hope you enjoy them as much as I do.  If you know of another site which belongs here, please use the comment option below to add along with your introduction.
LumberJocks
A really great discussion group where woodworkers share their projects and help each other [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=20</wfw:commentRss>
		</item>
		<item>
		<title>Wixey digital angle gage</title>
		<link>http://tablesawalignment.com/blog/?p=14</link>
		<comments>http://tablesawalignment.com/blog/?p=14#comments</comments>
		<pubDate>Sun, 27 Jul 2008 19:17:36 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Wixey digital angle gage]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=14</guid>
		<description><![CDATA[Introduction
It&#8217;s pretty common knowledge that the angle scales on most woodworking machines aren&#8217;t very accurate.  It&#8217;s why so many woodworkers avoid working with angles or resort to tedious trial and error methods.  Over the years a number of solutions have been sold in stores and catalogs that don&#8217;t offer any significant improvement.  Acceptance for products [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=14</wfw:commentRss>
		</item>
		<item>
		<title>Loaner Program</title>
		<link>http://tablesawalignment.com/blog/?p=19</link>
		<comments>http://tablesawalignment.com/blog/?p=19#comments</comments>
		<pubDate>Thu, 24 Jul 2008 03:09:41 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Loaner Program]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=19</guid>
		<description><![CDATA[Several people have asked me about the TS-Aligner Jr. shown in so many of the alignment and adjustment procedures.  So, I have decided to set aside a few units as loaners for members of this group.  That way everyone will have a chance to try out the procedures and experience what a well aligned table [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=19</wfw:commentRss>
		</item>
		<item>
		<title>Lee-Valley Digital Angle Finder</title>
		<link>http://tablesawalignment.com/blog/?p=18</link>
		<comments>http://tablesawalignment.com/blog/?p=18#comments</comments>
		<pubDate>Wed, 16 Jul 2008 01:45:21 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Lee-Valley digital angle finder]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=18</guid>
		<description><![CDATA[Introduction
Low cost digital instruments are making their way into woodworkers hands.  But, to avoid confusing digital precision with measurement accuracy I checked out this popular angle gauge in the Metrology Lab to see how it measured up.  That&#8217;s what makes this web site different.  There will be no test cuts, no plastic drafting triangles, or [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=18</wfw:commentRss>
		</item>
		<item>
		<title>Table Saw Rebuild Project</title>
		<link>http://tablesawalignment.com/blog/?p=17</link>
		<comments>http://tablesawalignment.com/blog/?p=17#comments</comments>
		<pubDate>Sun, 29 Jun 2008 04:40:09 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Introduction]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=17</guid>
		<description><![CDATA[There are darn few good things that can be said about the economy these days.  One little ray of sunshine is the current availability of used woodworking tools and machinery on the market.  If you are considering buying a table saw, then think about helping out a contractor and getting a bargain in the process.  Be [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=17</wfw:commentRss>
		</item>
		<item>
		<title>Wixey Fence Digital Read Out</title>
		<link>http://tablesawalignment.com/blog/?p=15</link>
		<comments>http://tablesawalignment.com/blog/?p=15#comments</comments>
		<pubDate>Sat, 28 Jun 2008 03:43:27 +0000</pubDate>
		<dc:creator>admin</dc:creator>
		
		<category><![CDATA[Table Saw Accessories]]></category>

		<guid isPermaLink="false">http://tablesawalignment.com/blog/?p=15</guid>
		<description><![CDATA[Those of us with failing eyesight are always looking for something that makes reading the fence easier.  I was quite surprised to see a $149 price point for the Wixey Saw Fence Digital Readout (DRO).  But, when I saw it at a local dealer for $99 with a free Wixey Digital Angle Gage I decided that [...]]]></description>
		<wfw:commentRss>http://tablesawalignment.com/blog/?feed=rss2&amp;p=15</wfw:commentRss>
		</item>
	</channel>
</rss>
